Model NO.: | RCA01-004-PY | Trademark: | SANNI |
---|---|---|---|
Surface Treatment: | Gold Plating Or Nickel Plating | Interface Type: | Plug Instertion |
Gender: | Female Single Unit | Application: | RF, Automobile, Amplifier,Video |
Highlight: | Yellow RCA Female Connector,Stereo Female Connector,RF stereo female connector |
RCA01-004-PY RCA Female Connector Single Unit Stereo Yellow RCA Female Jack
Product Description
The RCA connector is an electrical connector commonly used to transmit audio and video signals.The female and male jacks of a connector are called RCA jack and RCA plug.It is also called phono connector or RCA phono connector .
The RCA connector was originally used for audio signals.It has been used for purposes other than originally intended, including DC power connectors, speaker cable connectors and RF connectors. It is commonly used as connector for composite video signals . RCA connectors and cables are also used to transfer digital audio in S/PDIF format, with different plugs colors to distinguish them from other typical connections.
Color Code Options:
The Female RCA Jack are often color-coded, yellow for composite video,red for the right audio channel, and black or white for the left channel of stereo audio.
Product Specification:
1.Electrical Specification | |
Rated Power | 30V/DC.1.0A. |
Insulation resistance | 100MΩ Min. |
Dielectric voltage | 500V AC RMS After 1 Minute |
Contact resistance | 30mΩ Max. |
2.Mechanical Specification | |
Withstanding force for the terminals | 30N Max applied in pulled direction for 5 seconds |
Insert force | 30N Max |
Withdraw force | 8N Min. |
Withdraw force for center contact | 5N Min(Use a OD=3.2±0.05mm,Length=14士0.20mm gauge plug) |
3.Durability Specification | |
Life Cycle | Pull in and Pull out 1,500 Cycles Min. |
4.Environmental Specification | |
Salt spray test standard | 24 Hours without red rust |
Our Advantage
1.Design,prototype & automation basis in Dongguan city which is the manufacturing center of South China.
2.10+ dedicated and experienced engineers and in R&D department.
3.10+ production lines, 100+ experienced workers.
4.Manufacture center in Sichuan Province where located close to Chongqing Airport and Yangzi River wharf.
5.Help customers complete prototype design, development and verification and quickly transfer their ideas into mass production.